Speaking of which, the principle of the ultra-single molding-diffusion connection process is not complicated. It is nothing more than a mesh metal core between two plates, sealing the plate around it and then placing it on the abrasive tool. While heating and pressurizing with a pressure furnace, inert gas such as argon gas is input into the center of the cavity through the reserved conduit, so that the mesh structure inside naturally expands under the action of inert gas, and then firmly attaches it to the plates on both sides with the help of high temperature and high pressure, thus forming a hollow support structure.

The whole process looks very simple, just like a glass-blowing ware, you can make it casually, but in fact this thing is a virtue with other high-end manufacturing techniques. The principle is always mastered by middle school students, but in practice it can drive academician-level bosses crazy.

What is the value of the high temperature and high pressure of the pressure furnace? How to control the processing time of the components inside? Should thermal insulation or flux be applied before placing the metal mesh on the upper and lower plates? What is the dosage required?

In addition, how to make the specifications of the metal mesh? How to deal with the plates on both sides? How to grasp the timing of inert gas such as argon gas...

All these things cannot be solved by simple principles, but require countless experiments and accumulation to explore them little by little.

Fortunately, Tengfei Group had already had JSNB-II aviation and aerospace comprehensive analysis system at that time.

You should know that Tengfei Group's own system is not the one that is displayed to the outside world. In addition to having comprehensive aerospace and aerospace analysis capabilities, it also has a very powerful calculation and analysis effect on related process production and manufacturing equipment.

Combining the application of simple VR virtual reality technology and computer pre-working technology, combined with optimized algorithms, efficient software and large computers, Tengfei Group relies on its own JSNB-II system to conduct a very detailed study of the ultra-spinning forming-diffusion connection process in a short period of time.

On this basis, based on the actual experimental verification and problems encountered in trial production, we continuously trimmed the various data and algorithms in the software. Finally, within the time specified by the No. 10 Engineering Chief Engineer, the structural components of the No. 10 Engineering Verification Machine, which is no less than that of the carbon fiber and aramid fiber honeycomb structure, were taken out.

After testing, the structural components made using the ultra-single molding-diffusion connection process are 8% heavier than the carbon fiber-matched aramid fiber honeycomb structure, but the structural strength is comparable to that of carbon fiber-matched aramid fiber honeycomb structure, and the corrosion resistance index is even more than 12%.

More importantly, five domestic companies have corresponding production capacity for structural components produced using all-titanium alloy. After all, the core of the ultra-single molding-diffusion connection process is various micro-operated data. As for the equipment, there is really nothing high-end. Pressure furnaces and inert gases were already available in China twenty years ago. As long as the data is refined, large-scale conversion is not difficult if necessary.

The No. 10 chief engineer was very satisfied with the innovation in Tengfei Group's craftsmanship. After patting Zhuang Jianye's shoulder, Zhuang Jianye almost ran to the roof with the remaining half of Erguotou to continue cursing.

"The structural components of the titanium alloy are very good, but the most widely used in the No. 10 project is aluminum alloy. You Tengfei Group works harder to see if this process can be applied to aluminum alloy. I asked the relevant personnel to calculate that if your technology can be widely used, it can reduce the weight of the No. 10 project machine by 6.7%. In this way, I will be sure that the combat radius of the mass-produced model can reach more than 1,200 kilometers. How about it? Young man, work harder!"

What else? Still working hard?

Zhuang Jianye wanted to say at that time, great god, titanium alloy was already half-dead. The second-hand Galaxy computers obtained from the National University of Defense Technology have burned the CPU three times. It was finally difficult to make it happen. Can you let us Tengfei Group mass-produce it?

It seemed that he could see Zhuang Jianye’s thoughts. The No. 10 chief officer glanced at Zhuang Jianye, who was like his father-in-law who died, and smiled: “How to make it practical is your business, I only look at the result!”

After saying that, he patted Zhuang Jianye on the shoulder again and then took a group of people away with red faces.

Zhuang Jianye wanted to stop the old men with gray hair at that time, and stretched out his hands without hesitation to ask for some money. As a result, this idea was cut off by Zhuang Jianye as soon as it emerged.

He asked for money from the No. 10 engineering chief? The chief engineer could turn his feet out and care about his patent fees.

Tengfei Group has been able to make rapid progress in aluminum-lithium alloys and titanium alloys over the years. Where did it come from? Project No. 10.

All models of Tengfei Group generally use flight control systems. Where did it come from? Project No. 10.

The supporting technology of Tengfei Group’s aviation engines is becoming more and more exquisite. Why? It is still the supporting technology of Project No. 10.

The data in Tengfei Group's JSNB-II system is detailed and stable. What happened? Most of it is due to the supporting facilities of the No. 10 project.

It can be said that by supporting the No. 10 Project, Tengfei Group has obtained unimaginable aviation supporting technologies, and these technologies are not ordinary general technologies, and most of them are basic core technologies.

This is a comprehensive technology that uses a model to drive the whole. However, at that time, most domestic manufacturers did not have enough market-oriented vision, and they only had technology but didn't know how to transform it.

However, Tengfei Group led by Zhuang Jianye took the lead in this regard, transforming the technologies obtained from Project No. 10 into commercial mature products as much as possible, thereby seizing excess profits in the broad market.

Therefore, part of the success of Zhuang Jianye and Tengfei Group is a self-innovation and development, but more of it is to stand on the shoulders of giants to have the conditions to impact a broader market.

In this case, you should take care of others' money. Well, the chief engineer of No. 10 doesn't mind sitting down and talking to you. Carefully calculate the calculations of No. 10 engineering technology in Tengfei Group over the years.

"The great god is the great god. I can't afford to offend me, I can't afford to offend me!"

Looking at the back of the No. 10 Chief Engineer, Zhuang Jianye was not only moved or moved.

Just when Zhuang Jianye was thinking that the super-shuo forming-diffusion connection process that was made by hard-working, it became a decoration. How to maximize the benefits of this new technology? The chief engineer of a new anti-ship missile came over. Zhuang Jianye naturally could not let it go. He directly released the super-shuo forming-diffusion connection process technique, which immediately shocked the other party.

There is no way, the air intake duct produced by this ultra-single forming-diffusion connection process not only has a weight of 15% lighter than the traditional convex air intake, but also has a structural strength of 39%, and the most important corrosion resistance has almost doubled.

So after some preliminary demonstration and experiment, a certain anti-ship missile research institute and the Navy ordered 500 sets of titanium alloy air inlets with double-sided inner pipes from Tengfei Group, with a unit price of 400,000 yuan per set.

Then, a complete powertrain is formed with the WD-16P small turbojet engine and fuel tank, giving the other party a discounted price of RMB 1.8 million, and the total value of 500 sets is 900 million.
Chapter completed!