He lowered the blade flat and held the blade close to the blade with only one finger. He wanted to feel the center of gravity of the knife.

Feeling that the blade had balanced, Chen Xin let go of the hand holding the hilt. Under the influence of gravity, the blade stood up with the back of the knife on Chen Xin's fingers.

This is a feature of a samurai sword. If cast well, when the finger is placed at the center of gravity of the blade, the blade will stand up on its own under the action of gravity and can be supported with one finger.

Seeing the black knife standing firmly on his fingers, Chen Xin showed a satisfied smile on his lips, curled his fingers, and rotated the blade to hold the hilt.

Holding the knife and swinging it lightly, Chen Xin couldn't even feel the weight of the blade, as if he was holding only a feather.

But while being light, this knife does not give the knife holder a light feeling. When swinging the knife, you can still feel the process of power transfer from the handle to the tip of the knife.

Chen Xin was very satisfied with the changes in his love for the sword, especially when he used the sword to make a slashing action, and the blade did not make any sound.

"What a good knife, but the knife is still hidden without a gun." Although Chen Xin could not put down his love knife, he still rubbed and played with it for a while and put the knife back into the weapon cabinet.

His purpose of upgrading the weapon cabinet is not to upgrade these weapons, but to gain the ability to manufacture firearms.

Pulling open the chair and sitting down in front of the extra workbench next to the weapon cabinet, Chen Xin simply checked the tools on the table. Some of them he knew, but some of them he had never seen before.

After picking up a few tools and playing with them for a while, and then putting them back in place, Chen Xin found the gun drawings obtained after the weapon cabinet was upgraded from the drawer of the workbench.

"7.62mm double-action trigger semi-automatic pistol drawing"

"Parts required: barrel, sleeve, re-inlet spring, trigger, hammer, safety device, gun handle, magazine"

"You can use the tool table to process parts or use the survival point to complete the parts"

On the drawing is a pistol with a familiar look, somewhat similar to the M1911, but with some differences.

However, Chen Xin is not a pistol enthusiast, so he didn't have much delve into it. What he was concerned about was how to build a gun, rather than studying what kind of pistol it was.

By reading the drawings and checking the instructions provided by the system, Chen Xin finally knew how to use the tool table in front of him to make a pistol.

First of all, Chen Xin must have raw materials. If there is no or the raw materials are not qualified, you can spend the survival points to supplement or improve quality.

The second is to process according to the drawing size. The tools on the tool table are very complete, which can fully meet the needs of processing parts.

But this tests Chen Xin's craftsmanship. If the processing accuracy is not enough, it is obvious that the pistol made is problematic.

Of course, this can also cost survival points to make originally unqualified parts qualified.

But if you really don’t have the skills and want to save trouble, you can just spend your survival points to make parts. However, if you do this, it will be a little more expensive than processing yourself.

As for the assembly of parts, this cannot be replaced by a survival point. The system only provides 3D dynamic assembly diagrams, and Chen Xin also needs to do the assembly himself.

After understanding this, Chen Xin immediately wanted to make a pistol.

In terms of raw materials, because there is still some steel exchanged before, Chen Xin only needs to spend 2 survival points to improve the quality of the steel.

As for processing by himself, Chen Xin hesitated for a while and gave up this idea, instead chose to spend another 3 survival points and let the system help complete the processing.

Looking at the neatly placed parts on the workbench, Chen Xin suppressed his excitement and called out the assembly diagram provided by the system. After carefully reading it twice, he confirmed that he had remembered the steps clearly and then started assembly.

Carefully assembled each part according to the system's prompts, Chen Xin's movements were quite slow. Compared to those on TV who could quickly assemble firearms with blindfolded eyes, Chen Xin was obviously a layman.

But even so, he still assembled the gun stumblely.

Inserting the magazine, Chen Xin pulled the sleeve and holding the pistol he assembled himself. Chen Xin made a self-deserving aiming position.

"Bang!" With a little childish simulating the gunshot with his mouth, Chen Xin put the pistol back on the workbench.

For Chen Xin, guns are a familiar and unfamiliar thing.

To be familiar, which boy never played with a gun when he was a child? Although it was not a real gun.

It is unfamiliar to the Yan State's comprehensive gun ban policy. It is rare for ordinary people to see guns from childhood to touching guns, not to mention touching guns, even seeing guns in their lives.

Of course, even if Chen Xin has never seen a gun, he knows that the gun he assembled himself is useless except to scare people.

Because it also lacks an important component, that is, the bullet.

The power of a gun actually depends largely on the bullets, not the gun itself.

The gun itself is just a platform for firing. Although it has a certain impact on the power of the bullet, the advantages and disadvantages of the gun itself affect more the accuracy of the shooting rather than the power.

Most shooting games actually subconsciously ignore this point, which leads many people to think that as long as there are bullets, the more powerful the gun, the more it is, but in fact it is not that.

Chen Xin's pistol uses 7.62mm caliber bullets, and the magazine can hold 12 rounds.

This is an internationally universal bullet model. Many countries in the world use bullets of this caliber, not only for pistols, but also for machine guns.

Of course, the length of pistol bullets and machine gun bullets is still different. Generally speaking, the length of pistol bullets is 17mm, which means that the standard specification of 7.62mm pistol bullets should be 7.62×17mm.

Since the workbench has the function of making firearms, bullets, as an important part of firearms, will naturally not be missing.

But Chen Xin, who has no gunpowder, still needs to spend 1 survival point to supplement the materials if he wants to make bullets.

Fortunately, it is easier to build bullets than to build fireworks, especially when there are machines, Chen Xin only spent some time to build a box of bullets.

He filled the bullets one by one into the magazine, and after filling them, he inserted the gun handle. Chen Xin pulled the sleeve again, but this time, one bullet had been pushed into the chamber.

Chen Xin, who was afraid of getting out of the fire, closed the safety of the trigger, pulled out the magazine again and pressed another bullet in, then inserted the magazine back, touched the pistol, and felt a great sense of peace of mind.
Chapter completed!