Font
Large
Medium
Small
Night
PrevPage Index    Favorite Next

Section 193 Nanbao Coal Mine(2/2)

"Give it a try. The worst thing you can do is pull the fuse farther."

The two of them looked through the information together, looked at the terrain map, and saw how the blast holes should be drilled. Engineering blasting is very technical, and these two are the only professionals in the entire crossing group. Ye Yuming used to be a professional in the safety supervision department.

Anyone who manages a mine knows a thing or two about mine blasting.

A few days later, a loud noise came from the distant mining area, followed by several explosions in succession. Several nearby villages felt obvious shaking under their feet. When they came out to take a look, black smoke shot straight into the sky. Good thing.

The young man sneaked to the mining surface and took a look. A large piece of the ground here had been removed, revealing a large pit that was not deep. A hill had simply been cut in half.

The explosion was so loud that people from the nearby Qianhu Station came to inquire about the situation. After hearing that the shooter was an Australian, Qianhu left without saying a word. The liaison officer noticed that the young officer's face turned pale.

.

After blasting, several open-pit mining areas in Nanbao were exposed. Ye Yuming directed miners and infrastructure workers to clean up the ground and build mining working surfaces for workers to mine.

At first, workers used the manual mining method of shovels and shovels. The excavated coal was placed in large rattan baskets and carried manually to the rail station on the mining surface. Not only was the speed slow, but it also had to go up a slope, which was dangerous and physically demanding.

Ye Yuming hardened cement concrete on a section of the mining slope, and then laid iron-covered wooden rails. An animal-drawn winch station was set up on it. This way, coal can be loaded onto small mine carts directly from the mining working surface.

Pull it up along the track. The work efficiency is greatly improved.

The remuneration of miners is very generous - this is also due to the nature of their work. Miners are very physically demanding workers. Without enough protein, they must provide excessive amounts of carbohydrates to ensure calories.

There are two types of miners in Nanbao Mining Office. One is the immigrant workers, who are paid according to the standard of 180 yuan per month in circulation coupons. This salary is much higher than the standard salary of 118 yuan for industrial workers in Bairencheng.

Level. Of course, to get this salary, you must complete the quota. After simple calculations, Ye Yuming stipulated that each working group should be composed of 4 people: 2 excavators and 2 cart workers. Each group has one shift.

The minimum quota is 8 tons of coal or ore. For the excess amount, a bonus of 0.5 yuan will be given for every 200 kilograms of excess amount.

The other type is local piece-rate labor. Because local farmers have to farm, most of them are unwilling to work in the mines. Ye Yuming implemented the piece-rate temporary labor system. This is the work point system of modern small coal kilns. According to the work points transported to the coal stack

The number of coal trucks is distributed according to the number of workers, and 0.5 yuan is paid for every 200 kilograms of ore transported per day. A piece-rate laborer can mine about 1 to 2 tons of coal per day, and can get a circulation coupon of 5 to 10 yuan. If
Chapter completed!
PrevPage Index    Favorite Next