The assembly laboratory is divided into several assembly stations, and metal researchers are quickly assembling the first photolithography machine, which was named Galaxy by Liu Qi.

"No! No. 3! Decompose the No. 1 part and try again, faster!" Liu Zhi accurately calculated that there was an error of 0.01 seconds at the No. 3 station. This seemingly inconspicuous error made Galaxy's performance

A 500% improvement cannot be achieved.

After hearing this, No. 3 immediately adjusted the strength of his arms. The reason why there was a slight error was not because there was a problem with the abilities of the metal researchers.

It was because there was a slight calculation deviation in the placement of the parts, and it was precisely because of this deviation that No. 3 made the mistake.

Regarding Liu Zhi's reminder, Metal Man No. 3 understood and immediately made corrections.

After the reorganization, Liu Zhi detected that the other party's error was zero, which was the standard.

After the semi-finished photolithography machine passed through station three, it came to station four, which required the assembly of two thousand parts. Each part is basically the size of a little finger.

If an ordinary person were to assemble this photolithography machine, they would need to wear high-precision optical glasses. Only in this way can a certain degree of accuracy be maintained.

The first Galaxy lithography machine passed through No. 4 without any problems.

There are still no problems at workstation five...

As the Galaxy lithography machine gradually takes shape, it is getting closer and closer to being assembled, but the closer it is, the more focused everyone is.

Because, the further you go to the later processes, the more complicated the assembly process becomes, because it involves the psychotropic transmission system, just like the human body's neural network.

After problems arise in later processes, some parts need to be re-disassembled.

In short, each work station is faced with the assembly work of hundreds of thousands of parts at any time.

Sure enough, it still happened...

At station No. 7, there was an error. It was only 0.1nm, which is negligible. It is also fully qualified according to international standards.

But when it comes to Liu Zhi, there are only two concepts, qualified and unqualified.

Naturally, after arriving at work station No. 7, it was obvious that the Galaxy, which had become a semi-finished product, still did not meet the qualified standards.

"Go up to No. 6 for assistance and get it done as quickly as possible." Helpless, Liu Qi intelligently asked for help. Otherwise, No. 7 would have to reassemble the parts fifteen times, far exceeding the number of parts needed for the entire Galaxy.

To put it bluntly, Galaxy has only one assembly requirement, and the error rate is zero. There is no need for errors. With such harsh requirements, not to mention other technology companies, even metal people feel Alexander.

After all, Metal Man is not a god, and he still has too many problems.

Half an hour later, No. 6 and No. 7 stopped what they were doing and waited for Liu Zhi's test.

"There are still errors! This time the problem occurred at No. 6, the key points of the problem are 119 and 117." The problem occurred again, which has caused the parts to be reassembled 300,000 times.

If problems continue to occur at station No. 7, the number of repetitions will directly double to 600,000 times.

At that time, the first Galaxy lithography machine can be completely disassembled and reassembled from the first station.

Of course, if we start over, there will be many parts that cannot be used again. Liu Zhi really doesn't want to see or see this situation.

Is Liu Zhi nervous? He must be nervous. If Liu Qi were standing here, maybe the situation would be worse than Liu Zhi's.

The assembly was repeated 300,000 times, which took more than an hour.

"Huh!" The moment Metal Employee No. 6 finished, he finally breathed a sigh of relief from the bottom of his heart. It was too tiring. It had to be repeated hundreds of thousands of times, and it had to be completed in the shortest possible time. This was simply not something a human could do.

of life.

Employee No. 7 is also working hard, focusing all his energy on the equipment in front of him. Since its birth, No. 7 Metal researchers have never failed, and there has never been a time when the error rate was not zero.

But now, Employee No. 7 finally encountered resistance. The equipment in front of him was much more difficult than imagined, even though he had complete design parameters of the Galaxy lithography machine in his brain.

When No. 6 and No. 7 were completed again, Liu Zhi kept praying in his heart that he would pass the test in one go!

Tick ​​tock…

The sound of the clocks in the laboratory seemed to be amplified countless times, striking everyone's hearts.

Especially at this juncture, when people hear the sound of the clock, they feel like they are facing judgment.

"The error rate is zero!!!" Liu Zhi said excitedly, Damn! It's just a little bit close, especially at a few key nodes. If you don't pay attention, mistakes will inevitably occur.

What makes Liu Zhi want to cry is that no one can remove this cancerous design flaw except his eldest brother.

Difficult! Really difficult! It’s not that Liu Zhi is unwilling to solve it, but it takes too long.

Even if Liu Zhi and all the supercomputers combined, it would take at least a year to perfectly solve the problem.

Therefore, this burden can only be passed on to metal researchers. They must go beyond their own abilities and maintain 100% concentration. Only then will they have a 100% chance of achieving 100% success.

When No. 6 and No. 7 heard Liu Qi's answer, they both breathed a sigh of relief and smiled tacitly at each other. It was precisely because they communicated silently that they avoided this terrifying problem.

No problem with number eight...

No problem with number nine...

...

"Thump!..." Liu Zhi suddenly felt that his heartbeat was suffocating. There were no problems with the first few items, but the red light broke out again in process No. 10.

"..." Liu Zhi was speechless.

What else can be done? Find out the key points of the problem, disassemble it, and reassemble it.

Of course, some of the disassembled parts are no longer usable and need to be replaced, which undoubtedly affects assembly efficiency again.

The Galaxy lithography machine has a total of twenty-five processes, and it has now reached its tenth process. However, more and more problems have been exposed, and the error rate has also increased.

Of course, it's not that Metal Man's abilities are insufficient, but that the technical difficulty of the Galaxy lithography machine is too high. One hundred thousand parts are divided into hundreds of units, and the electronic neuron transmission lines are connected together, which is as long as 550 years.

More than ten kilometers.

Liu Zhi suddenly discovered that it was not an easy task to complete the final assembly work of the Galaxy lithography machine.

And tonight, a day destined to disappoint Liu Zhi, the Galaxy lithography machine failed to assemble again just like before.

Liu Zhi cut off contact with the supercomputer and returned his attention to the Babon Akiyama production base.

"Brother! Your casting speed is getting faster and faster!" At this time, Liu Zhicai discovered that his eldest brother had completed the underground workshop of the production workshop, which was the two floors deep underground.

The two underground floors are completely cast according to the design drawings in the brain. The large equipment in the No. 1 device can be installed immediately by installing auxiliary equipment.
Chapter completed!